LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Lighting Systems) >> Repair Instructions >> License Lamp/Backup Lamp Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the license/backup lamp electrical harness, if removed.
    2. Fig 1: License/Backup Lamp Electrical Harness
    GM1230534Courtesy of GENERAL MOTORS CORP.
  2. Position the license/backup lamp (3) to the rear compartment lid.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the license/backup lamp nuts (1) from the lamp.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

    4. Fig 2: License/Backup Lamp Nuts, Electrical Connector & Lamp
    GM1230529Courtesy of GENERAL MOTORS CORP.
  4. Connect the license/backup lamp electrical connector (2).
  5. Close the rear compartment.
scientia non olet · About LEMON Manuals