Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inspecting Brake Caliper Mounting Bracket Guide Surfaces

Courtesy of GENERAL MOTORS CORP.

Install the brake caliper mounting bracket to the knuckle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the two NEW brake caliper mounting bracket bolts and washers.
The new brake caliper mounting bracket bolts will come with an adhesive already applied to the threads.

Tighten: Tighten the front brake caliper mounting bracket bolts to 175 N.m (125 lb ft).
Lubricate the brake caliper pin bolts with high temperature silicone lubricant.

Fig 2: Identifying Brake Pads, Bracket & Retainers

Courtesy of GENERAL MOTORS CORP.

Install the brake pad retainers (1) to the brake caliper bracket (3).
Install the brake pads (2) to the brake caliper bracket (3).
Install the brake caliper. Refer to Brake Caliper Replacement - Front .