LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Seat System) >> Repair Instructions >> Lumbar Switch Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Bulkhead Connector
    GM752953Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the lumbar switch.
  2. Install the lumbar switch to the switch bezel assembly, verifying that the retaining tabs are fully seated.
  3. Install the power seat switch. Refer to Seat Switch Replacement - Power .
  4. Install the switch bezel assembly to the seat. Refer to Seat Switch Bezel Replacement .
scientia non olet · About LEMON Manuals