LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Use a pry bar in order to install the stabilizer shaft link insulators and the spacer.
    2. Fig 1: View Of Stabilizer Shaft Link Bolt And Nut
    GM623048Courtesy of GENERAL MOTORS CORP.
  2. Install the stabilizer shaft link and insulators.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the stabilizer shaft link bolt and nut.

    Tighten:  Tighten the stabilizer shaft link nut to 23 N.m (17 lb ft).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals