LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Steering Knuckle Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the knuckle to the vehicle.
    2. Fig 1: View Of Steering Knuckle To Strut Bolts
    GM385564Courtesy of GENERAL MOTORS CORP.
  2. Install the bolts which connect the strut to the knuckle. Hand tighten only.
  3. Connect the front lower control arm ball stud to knuckle. Refer to Lower Control Arm Replacement .
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Attach the ABS bracket to the steering knuckle.

    Tighten:  Tighten the ABS bracket bolt to 10 N.m (7 lb ft).

  5. Install the outer tie rod to the steering knuckle. Refer to Rack and Pinion Outer Tie Rod End Replacement in Power Steering.
  6. Install the front wheel drive shaft bearing. Refer to Wheel Bearing/Hub Replacement - Front .
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  8. Lower the vehicle.
  9. Measure and adjust the front alignment. Refer to Front Camber Adjustment in Wheel Alignment.
scientia non olet · About LEMON Manuals