Perimeter Lighting

Continue with the following steps in order to program the perimeter lighting feature:

1. Select Set Options.
2. Select Driver #1 Perimeter Lighting or Driver #2 Perimeter Lighting.
3. Highlight Perimeter Lighting and press the ENTER button to turn it ON or OFF. An asterisk appears when it is ON.
4. Select Save Options.
5. Exit from the menu.
6. If you turned the perimeter lighting feature ON, select Driver #1 Perimeter Light Timer or Driver #2 Perimeter Light Timer.
7. Highlight the desired time from the following selections:
   • Delay 5 Seconds
   • Delay 10 Seconds
   • Delay 15 Seconds
   • Delay 20 Seconds
   • Delay 25 Seconds
   • Delay 30 Seconds
8. Press the ENTER button to turn the selection ON or OFF. An asterisk appears when the selection in ON.
9. Select Save Options.
10. Exit from the menu.