Enter Programming
To enter programming with the DIC, perform the following actions:
- Turn the ignition to RUN.
- Place the vehicle in PARK.
- Press the MODE button on the DIC to scroll through the options until PERSONALIZATION PROGRAMMING appears on the display.
- Press the SELECT button.
- The DIC displays PRESS SELECT TO SELECT OPTIONS then PRESS RESET TO CHANGE OPTIONS.
- The DIC then displays DRIVER NUMBER: 1 2. An arrow is shown next to the current driver.
- Press the RESET button in order to change the driver # for this session of personalization.
- Press the SELECT button in order to advance to the next option.