Installation Procedure
- Install the storage compartment (3) to the center console end panel (1) making sure the 2 retaining tabs (6) are engaged.
- Install the 2 screws (5) attaching the storage compartment (3) to the center console end panel (1).
Tighten: Tighten the screws (5) to 2 N.m (18 lb in).
- Install the liner (2) to the storage compartment (3).
- Connect the electrical connector (4), if equipped.
- Install the center console end panel (1). Refer to Center Console End Panel Replacement .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.