LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> GTO Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls -- 5.7L -- (Introduction) >> Repair Instructions >> Fuel Hose/Pipes Replacement - Engine Compartment >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the engine compartment EVAP pipe at the chassis EVAP pipe (2).
    Fig 1: View Of Fuel Hoses/Pipes - Engine Compartment
    GM1372163Courtesy of GENERAL MOTORS CORP.
  2. Install the engine compartment fuel feed pipe at the chassis fuel feed pipe (3).
  3. Install the engine compartment EVAP pipe (1) at the EVAP canister purge solenoid.
  4. Install the engine compartment fuel feed pipe (4) at the fuel rail.
  5. Install the fuel filler cap.
  6. Inspect for leaks.
  7. Connect the negative battery cable.
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 2 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
  8. Install both fuel rail covers.
scientia non olet · About LEMON Manuals