LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Grand Prix GTP >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 3.8L >> Repair Instructions >> Filler Tube Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the fuel filler pipe.
    2. Fig 1: Fuel Filler Pipe
    GM699550Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fuel filler pipe screw to the under body.

    Tighten:  Tighten the screw to 13 N.m (115 lb in).

  3. Install the filler hose (4) to the fuel fill pipe (2).

    Inspect and ensure the filler hose (4) is fully seated on the fuel tank port and the fuel filler pipe (2).

    4. Fig 2: Identifying Fuel Tank Components
    GM186674Courtesy of GENERAL MOTORS CORP.
  4. Ensure the clamp (1) is properly located on the tank port between the bead (5) and the pipe (3).

    Tighten:  Tighten the fuel tank filler hose clamp to 2.5 N.m (22 lb in).

  5. Lower the vehicle.
  6. Install the fuel filler pipe screws to the fuel filler pipe access panel.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

    7. Fig 3: Fuel Filler Pipe Screws
    GM186665Courtesy of GENERAL MOTORS CORP.
  7. Add fuel and install the fuel fill cap.
scientia non olet · About LEMON Manuals