Scan Tool Data List
WARNING: This page is about a different variant/trim than selected.
Body Control Module (BCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, with the engine OFF. Transmission shift lever in the PARK position. | |||
| Battery Voltage | BCM Data | 0-15 volts | 14 volts |
| Ignition 1 | Inputs | ON/OFF | ON |
| BTSI Output | Inputs | ON/OFF | ON |
| Park (BTSI) Output Feed | Outputs | ON/OFF | ON |
Powertrain Control Module (PCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, with the engine OFF. Transmission shift lever in the PARK position. | |||
| Current Gear | Transmission Data | - | - |
| TR Sw. A/B/C/P | Transmission Data | Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, Invalid, Open | - |
| TCC Brake Switch | ON/OFF | OFF | |