LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - On Vehicle >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the right front tire and wheel assembly from the vehicle. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the right front engine splash shield. Refer to Splash Shield Replacement - Engine - Right in Body Front End.
    4. Fig 1: Power Steering Pump Components
    GM820256Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolt (2) from the power steering pump outlet pipe bracket.
  5. Place a drain pan under the vehicle in order to catch the draining fluid.
    6. NOTE: Refer to Power Steering Hose Disconnected Notice in Cautions and Notices.
  6. Remove the outlet pipe fitting (1) from the pump.
  7. Remove the outlet union from the pump.
  8. Remove the gasket.
  9. Remove the flow control valve from the pump.
  10. Remove the spring from the pump.
  11. Inspect the spring. Replace the spring if necessary.
scientia non olet · About LEMON Manuals