Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Position the amplifier to the rear window panel.
- Align the retainers to the openings in the rear window panel.
Carefully push in the retainers in order to secure the amplifier.
- Connect the electrical connectors to the amplifier.
- Install the rear window trim panel. Refer to Trim Panel Replacement - Rear Window Shelf (Impala) or Trim Panel Replacement - Rear Window Shelf (Monte Carlo) in Interior Trim.
IMPORTANT:
Make sure all of the foam washers are installed.
Faulty retainers must be replaced.
Faulty retainers must be replaced.