Child Restraint Tether Anchor Replacement

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Removal Procedure

Fig 1: Child Seat Tether Brackets

Courtesy of GENERAL MOTORS CORP.

Remove the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
Remove the screws from the child seat tether brackets.
Remove the child seat tether brackets from the rear shelf.

Installation Procedure

Fig 2: Child Seat Tether Brackets

Courtesy of GENERAL MOTORS CORP.

Position the child seat tether brackets to the slot in the rear shelf.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screws to the child seat tether brackets.
Tighten: Tighten the screws to the child seat tether brackets to 20 N.m (15 lb ft).
Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.