LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wiper System And Washer System) >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seal to the washer solvent container.
  2. Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor
    GM815208Courtesy of GENERAL MOTORS CORP.
  3. Install the washer pump to the washer solvent container.
  4. Connect the washer pump electrical connector.
  5. Connect the washer pump hose.
  6. Install the right front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  7. Fill the washer solvent container with washer solvent.
  8. Close the hood.