LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wiper System And Washer System) >> Repair Instructions >> Wiper Motor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the wiper motor to the wiper drive system module.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the wiper motor screws.

    Tighten:  Tighten the screws to 7 N.m (62 lb in).

    3. Fig 1: View Of Wiper Motor Screws
    GM815221Courtesy of GENERAL MOTORS CORP.
  3. Install the wiper crank arm (1) to the wiper motor shaft.
  4. Install the wiper crank arm nut (2) to the wiper motor shaft.

    Tighten:  Tighten the nut to 30 N.m (22 lb ft).

    5. Fig 2: Wiper Crank Arm & Nut
    GM1257438Courtesy of GENERAL MOTORS CORP.
  5. Install the wiper drive system module. Refer to Wiper Drive System Module Replacement .
scientia non olet · About LEMON Manuals