LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Body Front End) >> Repair Instructions >> Front Fender Liner Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front fender liner to the front fender.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the front fender liner screws to the wheel opening.

    Tighten:  Tighten the front fender liner screws to 7 N.m (61 lb in).

  3. Install the front fender liner screws to the lower rear of the fender.

    Tighten:  Tighten the screws to 7 N.m (61 lb in).

  4. Install the front fender liner screws to the lower engine compartment side rail.

    Tighten:  Tighten the screws to 7 N.m (61 lb in).

  5. Install the front fender liner screws at the front bumper fascia.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    6. Fig 1: View Of Front Fender Liner
    GM1229766Courtesy of GENERAL MOTORS CORP.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals