LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Body Front End) >> Repair Instructions >> Hood Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hood to the vehicle with an assistant.
  2. Align the hood hinges to the alignment marks on the hood.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the bolts to the upper hood hinge, with an assistant.

    Tighten:  Tighten the upper hood hinge bolts to 27 N.m (20 lb ft).

  5. Fig 1: View Of Hood Hinge & Bolts
    GM317815Courtesy of GENERAL MOTORS CORP.
  6. Install the assist rods to the hood. Refer to Assist Rod Replacement - Hood .
  7. Adjust the hood. Refer to Hood Adjustment .