Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Remove the screw from the front of the console.

IMPORTANT: The overhead console retainers are located on the switch side of the assembly.

Use a small, flat-bladed tool in order to release the 2 retainers. Press the retainers to the side to release the assembly.

Fig 1: Releasing Console Retainers

Courtesy of GENERAL MOTORS CORP.

Remove the overhead console from the headliner.
Disconnect the electrical connectors from the overhead console.

Fig 2: Overhead Console & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Remove the overhead console from the vehicle.

Fig 3: Removing Overhead Console

Courtesy of GENERAL MOTORS CORP.

Remove the screws from the drivers information center module.
Remove the drivers information center module from the overhead console.