Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Apply the parking brake.
Remove the center console mat.
Position the transaxle shift control lever as required.
Remove the front floor console trim plate screw (1).

Fig 1: Locating Front Floor Console Trim Plate Screw (Monte Carlo)

Courtesy of GENERAL MOTORS CORP.

Lift the front floor console trim plate up and rearward for access to the traction control switch.
Disconnect the electrical connector from the traction control switch.
Remove the traction control switch from the floor console trim plate.

Fig 2: Removing Traction Control Switch From Floor Console Trim Plate (Monte Carlo)

Courtesy of GENERAL MOTORS CORP.