LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the drive belt from the generator. Refer to Drive Belt Replacement (L26) or Drive Belt Replacement (L32) in Engine Mechanical - 3.8L.
  3. Remove the generator rear brace. Refer to Generator Brace Replacement (L26)  or Generator Brace Replacement (L32) .
  4. Remove the bolts (1, 3) and the stud (2) from the generator.
  5. Fig 1: Generator Stud & Bolts
    GM302324Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector from the generator.
  7. Position aside the protective boot from the generator output BAT terminal for access.
  8. Remove the generator output BAT terminal nut and remove the positive battery lead from the generator.
  9. Remove the generator.