LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Lighting Systems) >> Repair Instructions >> Headlamp Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the foglamp switch to the headlamp switch housing, pressing into place until fully seated.
  2. Connect the electrical connector to the headlamp switch.
  3. Connect the electrical connector to the foglamp switch.
  4. Install the headlamp housing switch to the instrument panel.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the screws to the headlamp housing switch.

    Tighten:  Tighten the headlamp housing switch screws to 2 N.m (18 lb in).

    6. Fig 1: Headlamp
    GM575129Courtesy of GENERAL MOTORS CORP.
  6. Install the instrument panel cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals