LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Interior Trim) >> Repair Instructions >> Sail Panel Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. If removed, position the retaining clip in the vehicle.
  2. Install the rivet (1) on the retaining clip (2).
    3. Fig 1: Retaining Clip & Rivet
    GM900769Courtesy of GENERAL MOTORS CORP.
  3. Position the panel on the rear quarter.
  4. Install the locator tab at the rear of the panel.
  5. Press in on the sail panel to secure the retaining clips.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. If equipped, install the retaining screw.

    Tighten:  Tighten the screw to 2 N.m (18 lb in).

    7. Fig 2: Sail Panel & Retaining Screw
    GM857495Courtesy of GENERAL MOTORS CORP.
  7. Press in to secure the screw button cover.
scientia non olet · About LEMON Manuals