LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Cruise Control System) >> Repair Instructions >> Cruise Control Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  3. Remove the steering wheel. Refer to Steering Wheel Replacement in Steering Wheel and Column.
  4. Remove the cruise control switch screws (1).
  5. Remove the steering wheel shroud screws (2).
  6. Remove the steering wheel shroud (3).
  7. Fig 1: View Of Steering Wheel Component Screws
    GM1228537Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the electrical connector.
  9. Remove the cruise control switch (1) from the steering wheel (2).
  10. Fig 2: View Of Cruise Control Switch & Steering Wheel Shroud
    GM1228539Courtesy of GENERAL MOTORS CORP.