LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Ignition Switch Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
    3. Fig 1: View Of Theft Deterrent Control Module
    GM860152Courtesy of GENERAL MOTORS CORP.
  3. Pull the theft deterrent control module (2) away from the lock cylinder housing (1).
    4. Fig 2: Depressing White Spring Loaded Retainers On Ignition Switch
    GM697348Courtesy of GENERAL MOTORS CORP.
  4. Depress the 2 white spring loaded retainers on the ignition switch.
  5. Slide the ignition switch downward away from the ignition lock cylinder case.
  6. Disconnect the electrical connector from the ignition switch.
scientia non olet · About LEMON Manuals