LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Bonneville SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.8L - Introduction >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: IAT Sensor & Intake Air Duct
    GM179042Courtesy of GENERAL MOTORS CORP.
  1. Insert the IAT sensor (2) into the rear air intake duct (1).
    2. Fig 2: Removing/Installation Intake Air Temperature (IAT) Sensor Electrical Connector
    GM179039Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector (1) to the IAT sensor (2).
scientia non olet · About LEMON Manuals