Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connector connectors to the amplifier.

Fig 1: Removing & Installing Amplifier
Courtesy of GENERAL MOTORS CORP.
Slide the amplifier onto the clutch pedal bracket.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Position the amplifier to the I/P beam. Install the fasteners.
Tighten: Tighten the fasteners to 10 N.m (89 lb in).