LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Vibe GT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Pulley Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Removing/Installing Generator Pulley
    GM838634Courtesy of GENERAL MOTORS CORP.
  1. Install the pulley (3) to the generator.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the nut using a box end wrench (2) and a socket wrench (1). Tighten the nut with the box end wrench while holding the rotor shaft with the socket wrench.

    Tighten:  Tighten the pulley nut to 111 N.m (81 lb ft).

  3. Install the generator to the vehicle. Refer to Generator Replacement .
scientia non olet · About LEMON Manuals