LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2007 >> G6 Base, 3.5 N >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Ignition Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of 4 Screws Securing Ignition Coil/Module Assembly To Bracket
    GM1238999Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coil and module assembly to the bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the ignition coil and module assembly screws.

    Tighten:  Tighten the screws to 4.5 N.m (40 lb in).

  3. Connect the spark plug wires as noted during the removal.
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  5. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals