Installation Procedure
WARNING: This page is about a different car, the 2007 Buick LaCrosse and 2007 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Install the outside rearview mirror to the door.
- Install the outside rearview mirror nuts.
Tighten: Tighten the nuts to 10 N.m (89 lb in).
- Connect the electrical connector to the outside rearview mirror.
- Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
- Inspect the mirror for proper operation.
NOTE:
Refer to Fastener Notice
.