Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying OnStar Module Bracket

Courtesy of GENERAL MOTORS CORP.

Install the OnStar module bracket.

CAUTION: Refer to Fastener Caution .

Tighten the OnStar bracket bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
Install the communication interface module. Refer to Communication Interface Module Replacement .
Install the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .