Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Antenna Lead And Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the radio electrical connector.
Connect the antenna lead (1) to the radio (2).

Fig 2: Radio Components

Courtesy of GENERAL MOTORS CORP.

Install the radio (2) to the instrument panel. Secure the radio with the 4 screws (1).
Install the IP accessory center trim plate. Refer to Instrument Panel Center Trim Panel Replacement .