Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Components

Courtesy of GENERAL MOTORS CORP.

Remove the IP accessory center trim plate. Refer to Instrument Panel Center Trim Panel Replacement .
Remove the 4 screws (1) which secure the radio (2).
Disconnect the clamp (4) from the radio receiver bracket (3).

Fig 2: Antenna Lead And Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Pull the radio (2) from the instrument panel.
Disconnect the following from the radio:
- The electrical connector
- The antenna lead (1)