Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wheel Speed Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The wheel speed sensor is serviceable only as an assembly. Do NOT attempt to service the sensor harness pigtail.

Remove the wheelhousing. Refer to Wheelhouse Panel Replacement .
Disconnect the wheel speed sensor electrical connector (1).

Fig 2: Wiring Harness, Pigtail Harness Nut And Pigtail Harness Nut

Courtesy of GENERAL MOTORS CORP.

Remove the 2 bolts retaining the wheel speed sensor pigtail harness (1).

Fig 3: Speed Sensor Retaining Bolt And Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the wheel speed sensor retaining bolt (1) and remove the wheel speed sensor (2) from the steering knuckle.