Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wheel Speed Sensor To Rear Wheel Hub

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE .

Install the wheel speed sensor to rear wheel hub.
Install the rear axle hub and bearing assembly. Refer to Rear Wheel Bearing and Hub Replacement .

Fig 2: Wheel Cylinder Components

Courtesy of GENERAL MOTORS CORP.

Connect the wheel speed sensor electrical connector (6).
Perform Diagnostic System Check - Vehicle .