Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cruise Control Switch Screws & Connector

Courtesy of GENERAL MOTORS CORP.

Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
Remove the two screws (1).
Disconnect the electrical connector (2).

Fig 2: Identifying Cruise Control Switch Pin

Courtesy of GENERAL MOTORS CORP.

Disconnect the pin (1) and remove the cruise control switch as shown in the illustration.