LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L - Introduction >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Engine Oil Pressure Sensor, Knock Sensor, & CKP Sensor Electrical Connectors
    GM1571236Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the crankshaft position (CKP) sensor electrical connector (3).
  2. Remove the oil level indicator tube. Refer to Oil Level Indicator Tube Replacement (LE5) .
    3. Fig 2: View Of Negative Cable Ground Terminal Lead
    GM1578421Courtesy of GENERAL MOTORS CORP.
  3. Remove the positive battery cable nut (2) from the starter solenoid.
  4. Remove the positive battery cable (3) from the starter solenoid.
    5. Fig 3: Identifying CKP Sensor
    GM1578475Courtesy of GENERAL MOTORS CORP.
  5. Remove the CKP sensor bolt.
  6. Remove the CKP sensor.
scientia non olet · About LEMON Manuals