LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System & Fuel System - 3.6L - Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Fuel Tank Module Assembly Components
    GM1796305Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank module assembly. Refer to Fuel Tank Module Replacement .
  2. Remove the fuel level sensor wiring harness from the clip (2) on the module.
  3. Disconnect the fuel level sensor electrical connector from the pump module electrical connector.
  4. Push the tab (1) on the sensor in towards the sensor and remove the level sensor from the module alignment feature (3).
scientia non olet · About LEMON Manuals