LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Engine Splash Shield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Engine Splash Shield To Front Subframe Retaining Screws
    GM1936964Courtesy of GENERAL MOTORS CORP.
  1. Install the engine splash shield (2) to the front subframe.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the engine splash shield to front subframe retaining screws (1) and tighten to 9 N.m (80 lb in).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals