Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Power Window/Mirror Switch

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Install the power window/mirror switch (2) by attaching to the retaining clips (3) on the console trim plate (1).

Install the power window/mirror switch (2) to the console trim plate (1).

Fig 2: Identifying Window & Exterior Mirror Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Position the console trim plate (1) over the floor console.
Connect the window and exterior mirror switch electrical connector (3).
Connect the ESP and heated seat switches assembly electrical connector (2).

Fig 3: View Of Console Trim Plate & Floor Console

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The console trim plate (1) is retained by clips.

Install the console trim plate (1) and push downwards at (A) to engage the retaining clips to the floor console (2).