LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Wheel Speed Sensor
    GM1943659Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Safety Glasses Caution .
    CAUTION: Refer to Vehicle Lifting Caution .
    CAUTION: Refer to Brake Dust Caution .
  1. Install the wheel speed sensor (2) to the knuckle (1).
    2. NOTE: Refer to Fastener Notice .
  2. Install the wheel speed sensor to knuckle retaining bolt (3).

    Tighten:  Tighten the bolt to 7 Nm (62 lb in).

    3. Fig 2: Identifying Wheel Speed Sensor Jumper Harness Electrical Connector
    GM1943660Courtesy of GENERAL MOTORS CORP.
  3. Connect the wheel speed sensor jumper harness electrical connector (1).
  4. Install the rear wheels. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals