Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Wheel Speed Sensor Jumper Harness Electrical Connector

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Safety Glasses Caution .

CAUTION: Refer to Vehicle Lifting Caution .

CAUTION: Refer to Brake Dust Caution .

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the rear wheels. Refer to Tire and Wheel Removal and Installation .
Disconnect the wheel speed sensor electrical connector (1).

Fig 2: Identifying Wheel Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the wheel speed sensor to knuckle retaining bolt (3).
Remove the wheel speed sensor (2) from the knuckle (1).