Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Door Control Module & Electrical Connectors

Courtesy of GENERAL MOTORS COMPANY

Snap the door module (1) onto the water deflector.
Connect the electrical connectors (2).
Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement , or Front Side Door Trim Panel Replacement .
If the door control module is equipped with the express-up function, reprogram the module. Refer to Control Module References for programming and setup information.