Installation Procedure
- Install the lower air cleaner body to the front inner wheelhouse.
- Engage the lower air cleaner body to the front inner wheelhouse retainer (2).
- Install the lower air cleaner body to front inner wheelhouse retaining nuts (1) and tighten to 10 N.m (89 lb in).
- Install the air cleaner element to the lower air cleaner body. Refer to Air Cleaner Element Replacement .
- Assemble the air cleaner element into the upper air cleaner body and place the upper body onto the lower air cleaner body.
- Install the 5 retaining clips (1) securing the upper air cleaner body to the lower air cleaner body.
- Install the IAT/ MAF sensor to the upper air cleaner body.
- Install the IAT/MAF sensor to the air intake duct.
- Install the IAT/MAF sensor to upper air cleaner body retaining clamp (1) and tighten to 2 N.m (18 lb in).
- Tighten the IAT/MAF sensor to air intake duct retaining clamp (2) to 2 N.m (18 lb in).
- Connect wiring harness connector (2) to the IAT/ MAF sensor (1).
- Install the engine cover. Refer to Engine Cover Replacement .
CAUTION:
Refer to Fastener Caution
.
Fig 4: Identifying Mass Air Flow (MAF)/Air Intake Temperature (IAT) Sensor & Wiring Harness Connector