Fastener Tightening Specifications

Application	Specifications
Application	Metric	English
Accelerator Pedal Position (APP) Sensor Assembly Retaining Bolts	20 N.m	15 lb ft
Air Cleaner Intake Duct to Throttle Body Retaining Clamp	4 N.m	35 lb in
Air Cleaner Lower Housing Retaining Bolts	10 N.m	89 lb in
Camshaft Position (CMP) Sensor Retaining Bolt	25 N.m	18 lb ft
Crankshaft Position (CKP) Sensor Retaining Bolt	25 N.m	18 lb ft
Engine Coolant Temperature (ECT) Sensor	20 N.m	15 lb ft
Evaporative Emissions (EVAP) Canister Retaining Bolts	6 N.m	53 lb in
Fuel Filler Hose Clamps	4 N.m	35 lb in
Fuel Filler Pipe to Chassis Retaining Bolts	9 N.m	80 lb in
Fuel Pipe Stone Guard Retaining Nuts	5 N.m	44 lb in
Fuel Rail Ground Strap To Intake Manifold Retaining Bolts	10 N.m	89 lb in
Fuel Rail Retaining Bolts	10 N.m	89 lb in
Fuel Tank Strap Upper Retaining Bolts	20 N.m	15 lb ft
Heated Oxygen Sensor (HO2S)	42 N.m	31 lb ft
Ignition Coil to Ignition Plate Assembly Retaining Bolts	12 N.m	106 lb in
Ignition Coil To Rocker Cover Retaining Blots	12 N.m	106 lb in
Intake Air Temperature/Mass Air Flow (AT/ MAF) to Air Intake Duct Retaining Clamp	2 N.m	18 lb in
Intake Air Temperature/Mass Air Flow (AT/ MAF) to Upper Air Cleaner Body Retaining Clamp	2 N.m	18 lb in
Knock Sensor (KS) Retaining Bolt	20 N.m	15 lb ft
Rear Subframe to Chassis Retaining Bolts
First pass	65 N.m	48 lb ft
Final pass	125 Degrees
Spark Plugs
Fit New Spark Plug	20 N.m	15 lb ft
Refit Existing Spark Plug	15 N.m	11 lb ft
Throttle Body Retaining Bolts	12 N.m	106 lb in