Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Exhaust System

Courtesy of GENERAL MOTORS CORP.

Position the exhaust system (4) to the vehicle and install the rubber isolators (5, 6, 7) to the hangers (1, 2, 3).

Fig 2: View Of Gasket & Exhaust Pipe

Courtesy of GENERAL MOTORS CORP.

Install the new gasket onto the catalytic converter pipe flange.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Assemble the exhaust system pipe to the catalytic converter pipe and install new nuts.
Tighten: Tighten the nuts to 37 N.m (27 lb ft).
Check the entire exhaust system for leaks.
Lower the vehicle.