LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: View Of Battery Current Sensor
    GM1891579Courtesy of GENERAL MOTORS CORP.
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LE5 or LE9)  or Battery Negative Cable Replacement (LY7,LZ4,LZ9,LZE) .
  2. Ensure that the location measurement of the battery current sensor was recorded for reference during installation.
  3. Squeeze the ground ends of the negative battery cable together and remove the sensor (1) from the cable.
scientia non olet · About LEMON Manuals