LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Engine Control System & Fuel System - 2.4L - Repair Instructions >> Repair Instructions >> Accelerator Pedal with Position Sensor Assembly Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Accelerator Pedal Position Sensor & Bolts
    GM1544734Courtesy of GENERAL MOTORS CORP.
  1. Install the APP sensor (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the APP bolts (1) and tighten to 10 N.m(89 lb in)..
  3. Connect the APP sensor electrical connector.
  4. Confirm that the APP sensor connector locking clip is fully secured.
scientia non olet · About LEMON Manuals