LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1983 >> 928 Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustment >> Caster >> 911SC
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Wheel Alignment Specifications & Procedures: Adjustment: Caster: 911SC

  1. If caster angle is not within specifications, it will be necessary to remove adjuster plate which attaches to front suspension strut.
  2. Remove enough front compartment carpet to allow access to top of each suspension strut. Mark position of each movable plate, located below each Allen screw.
  3. Loosen each screw and upper suspension strut nut. Move assembly lengthwise to obtain correct caster angle. Tighten all 3 screws and suspension strut nut.
scientia non olet · About LEMON Manuals