LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1994 >> 911 Speedster, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> DME Control Unit >> Ignition Output Control Signal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Output Control Signal

  1. Ensure DME control unit is properly connected. Connect oscilloscope positive lead to terminal No. 5 (White wire) and negative lead to terminal No. 2 (Brown wire) of the ignition control unit. See Figure .
  2. Using ignition switch, operate starter motor. Oscilloscope must show DME control unit signal. See Figure . If replacing ignition control unit, apply Heat Conducting Paste (5-942-860-003) to ignition control unit base plate.
scientia non olet · About LEMON Manuals